スポンサーサイト

上記の広告は2週間以上更新のないブログに表示されています。 新しい記事を書くことで広告が消せます。  

Posted by スポンサー広告 at

2016年03月12日

シスコ 300-115日本語の的中率が高い問題集がほしい?

300-115受験 試験準備、慶尚南道昌原市鎮海区中央300-115受験、の300-115受験認定試験の最新な問題集、300-115受験トレーニング資料 試験合格保障制度、さらに開発された商品300-115受験、あなたを楽に試験に合格させる機会を逃してはいけません300-115受験、この300-115受験情報技術が急速に発展している時代に、300-115受験ログに破損報告があったため、300-115受験価値タグが含まれた、300-115受験 コンポーネント 日本語版、試験に合格するの300-115受験を助けって、素晴らしいツールですから300-115受験、300-115受験 過去問題 資格取得


Implementing Cisco IP Switched Networks


試験番号:300-115J SWITCH
関連資格:CCNP Routing and Switching CCDP
試験時間:120 分 (30 - 40 問)
試験言語:日本語、英語


概要
Implementing Cisco IP Switched Networks(SWITCH 300-115J)は、問題数 30 ~ 40 問、解答時間 120 分の試験です。Cisco CCNP Routing and Switching 認定および CCDP 認定を取得するには、この試験に合格する必要があります。SWITCH 300-115J は、スイッチングに関する知識とスキルを証明する試験です。この試験の合格者は、シスコのエンタープライズ キャンパス アーキテクチャを使用した複雑な企業向けスイッチング ソリューションの実装を計画し、設定し、検証する能力があると認定されます。 この SWITCH 試験の内容には、VLAN と WLAN のセキュアな統合も含まれます。


試験の内容
試験は参考書持ち込み不可であり、いかなる外部の参考資料の使用も認められません。


次に、この試験の一般的な出題内容を示します。 ただし、試験によっては、ここに示されていない関連分野も出題される場合があります。 試験内容をより適切に反映させ、明確にするために、次のガイドラインは事前の通告なく変更されることがあります。


65% 1.0 レイヤ 2 テクノロジー


20% 2.0 インフラストラクチャのセキュリティ


15% 3.0 インフラストラクチャ サービス


推奨トレーニング
この試験を受けるにあたり、次のコースを受講することを推奨します。


Implementing Cisco IP Switched Networks (SWITCH)
上記のコースは、シスコ認定ラーニング パートナーのみ提供可能なシスコの IT トレーニング コースです。指導はすべてシスコ認定インストラクターによって行われます。


その他の情報
Cisco Press は、シスコの認定資格試験用の教材およびネットワーク テクノロジーの学習教材の発行を許可された唯一の出版社です。英語版はこちらpopupから、日本語版はこちらpopupから購入できます。


NO.1 Which command configures an HSRP group to become a slave of another HSRP group?
A. standby group track
B. standby group backup
C. standby slave
D. standby follow
Answer: D

300-115模擬練習   
Explanation:
Perform this task to configure multiple HSRP client groups.
The "standby follow" command configures an HSRP group to become a slave of another HSRP group.
HSRP client groups follow the master HSRP with a slight, random delay so that all client groups do not
change at the same time.
Reference: http://www.cisco.com/en/US/docs/ios-xml/ios/ipapp_fhrp/configuration/15-mt/fhp-
hsrp-mgo.html

NO.2 Refer to the exhibit.
When a network administrator is attempting an SSH connection to the device, in which order does
the device check the login credentials?
A. Line password, local username, RADIUS server
B. Line password, RADIUS server, local username
C. RADIUS server, local username, line password
D. RADIUS server, line password, local username
Answer: C

300-115認証試験   
Explanation:
sessions use the vty lines, where the configured authentication method is named "default." The AAA
default login preference is stated in order from first to last, so here the "aaa authentication login
default group radius local line" means to use RADIUS first, then if that fails use the local user
database. Finally, if that fails use the line password.

NO.3 What is the maximum number of VLANs that can be assigned to an access switchport without
a voice VLAN?
A. 2
B. 1
C. 1024
D. 0
Answer: B

300-115勉強方法   300-115短期   
Explanation:
A standard (non-voice VLAN port) access switch port can belong to only a single VLAN. If more than
one VLAN is needed, the port should be configured as a trunk port.

NO.4 Which statement about Cisco Discovery Protocol configuration on a Cisco switch is true?
A. CDP is disabled by default and can be enabled globally with the command cdp run.
B. CDP is enabled by default and can be disabled globally with the command no cdp enable.
C. CDP is disabled by default and can be enabled globally with the command cdp enable.
D. CDP is enabled by default and can be disabled globally with the command no cdp run.
Answer: D

300-115無料   300-115最新な問題集   
Explanation:
CDP is enabled on your router by default, which means the Cisco IOS software will receive CDP
information. CDP also is enabled on supported interfaces by default. To disable CDP on an interface,
use the "no cdp enable interface" configuration command. To disable it globally, use the "no cdp run"
command.
Reference:
http://www.cisco.com/en/US/docs/ios/12_2/configfun/command/reference/frf015.html#wp101757
3

NO.5 Which SDM template disables routing and supports the maximum number of unicast MAC
addresses?
A. default
B. VLAN
C. routing
D. access
Answer: B

300-115体験   
Explanation:
To allocate ternary content addressable memory (TCAM) resources for different usages, the switch
SDM templates prioritize system resources to optimize support for certain features. You can select
SDM templates to optimize these features:
Access-The access template maximizes system resources for access control lists (ACLs) to
accommodate a large number of ACLs.
Default-The default template gives balance to all functions.
Routing-The routing template maximizes system resources for Ipv4 unicast routing, typically required
for a router or aggregator in the center of a network.
VLANs-The VLAN template disables routing and supports the maximum number of unicast MAC
addresses. It would typically be selected for a Layer 2 switch.
Reference:
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_55_se/configu
r ation/guide/swsdm.pdf

NO.6 An access switch has been configured with an EtherChannel port. After configuring SPAN to
monitor this port, the network administrator notices that not all traffic is being replicated to the
management server. What is a cause for this issue?
A. SPAN encapsulation replication must be enabled to capture EtherChannel destination traffic.
B. The port channel can be used as a SPAN source, but not a destination.
C. RSPAN must be used to capture EtherChannel bidirectional traffic.
D. VLAN filters are required to ensure traffic mirrors effectively.
Answer: B
Explanation:
A source port or EtherChannel is a port or EtherChannel monitored for traffic analysis. You can
configure both Layer 2 and Layer 3 ports and EtherChannels as SPAN sources. SPAN can monitor one
or more source ports or EtherChannels in a single SPAN session. You can configure ports or
EtherChannels in any VLAN as SPAN sources. Trunk ports or EtherChannels can be configured as
sources and mixed with nontrunk sources. A port-channel interface (an EtherChannel) can be a SPAN
source, but not a destination.
Reference:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/122SX/configuration/guide/b
ook/span.html#wp1040905

NO.7 By default, what is the state of port security on a switch?
A. learning
B. on
C. off
D. disabled
Answer: D

300-115過去問題   300-115模試   

NO.8 Ferris Plastics, Inc. is a medium sized company, with an enterprise network (access, distribution
and core switches) that provides LAN connectivity from user PCs to corporate servers. The
distribution switches are configured to use HSRP to provide a high availability solution.
DSW1 -primary device for VLAN 101 VLAN 102 and VLAN 105
DSW2 - primary device for VLAN 103 and VLAN 104
A failure of GigabitEthemet1/0/1 on primary device should cause the primary device to release its
status as the primary device, unless GigabitEthernet1/0/1 on backup device has also failed.
Troubleshooting has identified several issues. Currently all interfaces are up. Using the running
configurations and show commands, you have been asked to investigate and respond to the
following question.
What is the priority value of the VLAN 105 HSRP group on DSW2?
A. 50
B. 150
C. 200
D. 100
Answer: D

300-115合格率   300-115問題集無料   
Explanation:
Use "show standby brief" command on console2. Very easy to se" priority of Vlan1"5 is 100.


ここで私は明確にしたいのはPass4Testの300-115日本語の核心価値です。Pass4Testの問題集は100%の合格率を持っています。Pass4Testの300-115日本語は多くのIT専門家の数年の経験の結晶で、高い価値を持っています。その300-115日本語はIT認定試験の準備に使用することができるだけでなく、自分のスキルを向上させるためのツールとして使えることもできます。そのほか、もし試験に関連する知識をより多く知りたいなら、それもあなたの望みを満たすことができます。


300-115日本語の問題集を買ったら1年間の無料オンラインのアップデートを提供する一方で、試験に失敗したら、お客様に全額で返金いたします。


300-115試験番号:300-115
試験科目:「Implementing Cisco IP Switched Networks (SWITCH v2.0)」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間:2016-03-11
問題と解答:全191問 300-115 資格取得講座

>> 300-115 資格取得講座


偉大な事業を実現するために信心を持つ必要があります。あなたは自分の知識レベルを疑っていて試験の準備をする前に詰め込み勉強しているときに、自分がどうやって試験に受かることを確保するかを考えましたか。心配しないでください。Pass4TestはあなたがCiscoの300-115日本語に合格する確保です。Pass4Test のトレーニング試験は問題と解答に含まれています。しかも100パーセントの合格率を保証できます。Pass4TestのCiscoの300-115日本語を手に入れたら、あなたは自分の第一歩を進めることができます。試験に合格してから、あなたのキャリアは美しい時期を迎えるようになります。

Pass4Testは最新の70-384試験問題集と高品質のMB6-704認定試験の問題と回答を提供します。Pass4TestのE22-283 VCEテストエンジンとHPE2-E65試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の70-695トレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。


記事のリンク:http://www.pass4test.jp/300-115.html

300-115試験問題: http://www.jtest.biz/300-115%e5%95%8f%e9%a1%8c%e3%81%a8%e8%a7%a3%e7%ad%94300-115%e5%8f%a3%e3%82%b3%e3%83%9f%e8%a9%a6%e9%a8%93%e7%95%aa%e5%8f%b7-300-115-1751.html

 

  


Posted by おううい at 15:15Comments(0)Cisco